Welcome to Piletest!
For over 25 years Piletest is setting the world's standards in pile and deep foundation testing equipment. We continuously develop the cutting edge equipment in the pile integrity testing market, based on the following key products
Our Products Advantages
Warranty
Accurate, productive, robust and easy to use 3 years warranty
Updates
10 years of free software upgrades
Optimized
Use your own device (Windows, Android, laptop, tablet, Smartphone)
Complementary SOS
Complimentary SOS (Second Opinion Service) on test results
Our Guarantee
30 days money-back guarantee
Experience
25 years of experience in developing pile testing systems for quality and integrity testing of deep foundations
PET
Pile Integrity Test
PET Uses the pulse-echo method (PEM, PIT) for pile integrity testing. A pile test starts when the pile top is struck with a handheld hammer and the PET digital accelerometer records the reflected waves on the computer screen. The resulting signal (reflectogram) readily provides information regarding the pile's length and integrity.
This is the primary method used in the industry for a quick pile integrity test, to control the quality of piles on a site with a large number of piles.
Two PET versions are available:
PT001 - PET Pro USB
PT002 - PET Bluetooth.
Fully supports the following standards:
[ASTM D5882-16], [AFNOR P160-2,4]
What our customers say about the PET
"We were up and running on the same day..."
WA, USA
"Have been using it for more than 10 years and found it very reliable"
Delhi, India
CHUM
Cross Hole Ultrasonic Monitor with
Tomography support
CHUM supports Cross Hole Sonic Logging (CSL) as well as Single Hole Ultrasonic Testing (SHUT, SSL) and enables on site in real-time two-dimensional Tomography (2DT) - and off-site, true three-dimensional Tomography (3DT,CSLT) analysis.
This is the primary method used in the industry for for high resolution testing of large drilled piles (ACIP)
Fully supports the following standards:
ASTM D6760-16, AFNOR NF P 94-160-1 (2000).
What our customers say about the CHUM
"We are lucky to have the CHUM, easy to use, get the results, and explain to client/consultant"
"Manila, Philippines 2022,
When buying his second CHUM after 14 years of use"
BIT
Borehole Inclination Tester
BIT quickly and accurately measures the inclination (verticality) of
A dry/wet borehole during and after drilling - without the need for a heavy caliper
An existing pile - without the need for special expensive inclinometer tubes with grooves
BIT is based on gyro technology, to enable simple, fast, and productive inclination testing, with a very lightweight system that can be handled by a single operator
NEW! Fully supports the standard:
ASTM D8232 - 18
What our customers say about the BIT
"We are lucky to have the BIT, easy to use, get the results, and explain to client/consultant"
"We are lucky to have the BIT, easy to use, get the results, and explain to client/consultant"
PSI
.jpeg)
Parallel Seismic Instrument
PSI uses the well-known Parallel Seismic method to establish the depth of existing foundations (piles) where the superstructure (i.e. existing building) precludes access to the pile's head.
The test requires the installation of a plastic access tube in parallel, and as close as possible, to the tested pile. The tube should be carried down to a depth exceeding the assumed pile length by a margin of 8-10m and filled with water. In unsaturated soils, the tube should be firmly grouted in the hole to achieve good coupling with the surrounding soil.
What our customers say about the PSI
"We are lucky to have the CHUM, easy to use, get the results, and explain to client/consultant"
"We are lucky to have the CHUM, easy to use, get the results, and explain to client/consultant"
Piletest.com Limited
18 Fouracres Walk
Hemel Hempstead
Herts HP3 9LB
United Kingdom