top of page
  • 3 years warranty

  • 10 years free software upgrades

  • 30 days money-back guarantee

  • Accurate, Productive, Robust and Easy to use

  • Use your own device (Windows, Android, laptop, tablet, Smartphone)

  • Complimentary SOS (Second Opinion Service) on test results

  • 25 years of experience in developing pile testing equipment for quality and integrity testing of deep pile foundations.

Welcome to Piletest!

For over 25 years Piletest is setting the world's standards in pile and deep foundation testing equipment. We continuously develop the cutting edge equipment in the pile integrity testing market, based on the following key products


Please fill this form

Thanks for submitting!


Our Products Advantages:

PET_Android offwhite logo.jpg


Pile Eche Tester

PET Uses the pulse-echo method (PEM, PIT) for pile integrity testing. A pile test starts when the pile top is struck with a handheld hammer and the PET digital accelerometer records the reflected waves on the computer screen. The resulting signal (reflectogram) readily provides information regarding the pile's length and integrity.

This is the primary method used in the industry for a quick pile integrity test, to control the quality of piles on a site with a large number of piles.

Two PET versions are available:

PT001 - PET Pro USB

PT002 - PET Bluetooth.


Fully supports the following standards:

[ASTM D5882-16], [AFNOR P160-2,4]

What our customers say about the PET
"We were up and running on the same day..."

"Have been using it for more than 10 years now and found it very reliable."
Delhi, India


Cross Hole Ultrasonic Monitor 
with Tomography support

CHUM supports Cross Hole Sonic Logging (CSL) as well as Single Hole Ultrasonic Testing (SHUT, SSL) and enables on site in real-time two-dimensional Tomography (2DT) - and off-site, true three-dimensional (3D) Tomography (3DT,CSLT) analysis. 
This is the primary method used in the industry for for high resolution testing of large drilled piles (ACIP) 

Fully supports the following standards:
ASTM D6760-16, AFNOR NF P 94-160-1 (2000).

3D Tomography

What our customers say about the CHUM
"We are lucky to have the CHUM, easy to use, get the results, and explain to client/consultant. " -
Manila, Philippines 2022,

When buying his second CHUM after 14 years of use

CHUM_System_offwhite logo.jpg
BIT System_offwhite_logo.jpg


Borehole Inclination Tester

BIT quickly and accurately measures the inclination (verticality) of

A dry/wet borehole during and after drilling - without the need for a heavy caliper
An existing pile - without the need for special expensive inclinometer tubes with grooves
BIT is based on gyro technology, to enable simple, fast, and productive inclination testing, with a very lightweight system that can be handled by a single operator

NEW!   Fully supports the standard:

ASTM D8232 - 18



Parallel Seismic Instrument

PSI uses the well-known Parallel Seismic method to establish the depth of existing foundations (piles) where the superstructure (i.e. existing building) precludes access to the pile's head.

The test requires the installation of a plastic access tube in parallel, and as close as possible, to the tested pile. The tube should be carried down to a depth exceeding the assumed pile length by a margin of 8-10m and filled with water. In unsaturated soils, the tube should be firmly grouted in the hole to achieve good coupling with the surrounding soil.

PSI2 is compliant with the following standards:

AFNOR NF P94-160-3 and ASTM D8381-21


Some of our major customers

bottom of page